National Instruments SHM128M-SH128M Ethernet Cable

Designed for Gigabit Ethernet transmission, the SHM128M-SH128M is an Ethernet Cable from National Instruments. This cable comes with identical, X-coded (male) M12 front end and back end connectors. Shielded wires and connector are used in this cable. The NI SHM128M-SH128M Ethernet Cable is designed for the National Instruments FieldDAQ devices. The FieldDAQ devices come with redundant Ethernet ports (PORT 0 and PORT 1). These ports can be accessed through M12 female connectors.

The SHM128M-SH128M Ethernet Cable can be used to achieve connectivity between a FieldDAQ device and a consumer's Ethernet network. You can also use this cable to connect two FieldDAQ devices. However, both devices must be configured to operate on the same subnet mask. The NI SHM128M-SH128M Ethernet Cable has straight-through cabling and can be acquired in different lengths under part numbers 785946-0R3 (0.3 meters), 785946-01 (1 meter), and 785946-03 (3 meters). This cable can also be considered for <1 Gbps speed Ethernet connections.